EON AI VENTURES · AEROSPACE / CONCEPT TRAINING LIBRARY

AER-TRN-01-P01 / CONCEPT DRAFT 1.0

Access and supported withdrawal

Make the source, access order and support path visible before changing the unit state.

Make the source, access order and support path visible before changing the unit state.
Existing concept visualisation · enlarge to inspect

Fictional inert trainer only; source/training reviewer approval required before training use. No operational aircraft, OEM, qualification, licence-credit or release authority.

Article AER-TRN-01 · lesson TRN-LRU-01 · concept draft 1.0 · source review required

  1. 01

    Confirm the training article

    Read AER-TRN-01 and BAY-01; compare with the assigned lesson.

    Expected evidence
    The article and source identify the same inert trainer.
    Hold / limitation
    A different or unreadable article ID means HOLD.
  2. 02

    Freeze the lesson revision

    Use TRN-LRU-01 v2 teaching-cue concept; retain A permitted and B excluded.

    Expected evidence
    The revision and allowed-unit list are recorded.
    Hold / limitation
    A missing source or changed list requires reviewer disposition.
  3. 03

    Confirm an inert training setup

    The instructor establishes the permitted inert setup and supervised scope. This draft does not supply a real isolation procedure.

    Expected evidence
    The reviewer has accepted the training conditions.
    Hold / limitation
    Do not apply this draft to energized equipment or an aircraft.
  4. 04

    Review the support and access space

    Identify AP-01, its left hinge and R1/R2 with the support bed.

    Expected evidence
    The intended model access and rail path are understood.
    Hold / limitation
    Missing support or an obstructed sweep means HOLD.
  5. 05

    Identify and release D1

    On the reviewed model, operate the upper catch D1.

    Expected evidence
    D1 is visibly clear.
    Hold / limitation
    Do not infer a safe release from an occluded view.
  6. 06

    Identify and release D2

    Operate lower catch D2 before AP-01.

    Expected evidence
    Both catches are visibly clear.
    Hold / limitation
    An engaged catch blocks the panel step.
  7. 07

    Open AP-01

    Use the source left-hinge direction to reveal the bay.

    Expected evidence
    Panel-open reference state matches the named model.
    Hold / limitation
    Do not force another hinge direction or claim physical clearance from this viewer.
  8. 08

    Identify P1 and J1

    Distinguish the moving bay plug from the unit-fixed receptacle.

    Expected evidence
    One plug and one receptacle are identified.
    Hold / limitation
    Ambiguous identity or source detail means HOLD.
  9. 09

    Review separation and harness parking

    In a reviewed demonstration, separate the coupling and park the harness outside the rail path.

    Expected evidence
    Coupling and parked-harness evidence are available.
    Hold / limitation
    A cable across the path blocks rail travel.
  10. 10

    Review T1 and T2

    Identify unit-mounted retainer cams and cabinet-fixed keepers.

    Expected evidence
    The model/source shows the intended clear retainer state.
    Hold / limitation
    Unclear pivot, keeper contact or state requires review.
  11. 11

    Inspect supported withdrawal

    Use the withdrawn GLB to inspect rail alignment and continuous support.

    Expected evidence
    Both rails and the support bed remain part of the plan.
    Hold / limitation
    A static GLB is not proof that a physical movement was completed.
  12. 12

    Record the checkpoint

    Record the named withdrawn state and any missing view before the configuration decision.

    Expected evidence
    A reviewer can trace source, state and unresolved gaps.
    Hold / limitation
    The existing tray-transfer checkpoint is not a demonstrated continuous lateral lift.