{
  "id": "AER-TRN-01-P01",
  "equipment_id": "AER-TRN-01",
  "lesson_id": "TRN-LRU-01",
  "version": "Concept draft 1.0",
  "status": "UNAPPROVED_CONCEPT_TRAINING_DRAFT",
  "title": "Access and supported withdrawal",
  "summary": "Make the source, access order and support path visible before changing the unit state.",
  "scope": "Fictional inert trainer only; source/training reviewer approval required before training use. No operational aircraft, OEM, qualification, licence-credit or release authority.",
  "steps": [
    {
      "number": 1,
      "action": "Confirm the training article",
      "instruction": "Read AER-TRN-01 and BAY-01; compare with the assigned lesson.",
      "expected_evidence": "The article and source identify the same inert trainer.",
      "hold_or_limit": "A different or unreadable article ID means HOLD."
    },
    {
      "number": 2,
      "action": "Freeze the lesson revision",
      "instruction": "Use TRN-LRU-01 v2 teaching-cue concept; retain A permitted and B excluded.",
      "expected_evidence": "The revision and allowed-unit list are recorded.",
      "hold_or_limit": "A missing source or changed list requires reviewer disposition."
    },
    {
      "number": 3,
      "action": "Confirm an inert training setup",
      "instruction": "The instructor establishes the permitted inert setup and supervised scope. This draft does not supply a real isolation procedure.",
      "expected_evidence": "The reviewer has accepted the training conditions.",
      "hold_or_limit": "Do not apply this draft to energized equipment or an aircraft."
    },
    {
      "number": 4,
      "action": "Review the support and access space",
      "instruction": "Identify AP-01, its left hinge and R1/R2 with the support bed.",
      "expected_evidence": "The intended model access and rail path are understood.",
      "hold_or_limit": "Missing support or an obstructed sweep means HOLD."
    },
    {
      "number": 5,
      "action": "Identify and release D1",
      "instruction": "On the reviewed model, operate the upper catch D1.",
      "expected_evidence": "D1 is visibly clear.",
      "hold_or_limit": "Do not infer a safe release from an occluded view."
    },
    {
      "number": 6,
      "action": "Identify and release D2",
      "instruction": "Operate lower catch D2 before AP-01.",
      "expected_evidence": "Both catches are visibly clear.",
      "hold_or_limit": "An engaged catch blocks the panel step."
    },
    {
      "number": 7,
      "action": "Open AP-01",
      "instruction": "Use the source left-hinge direction to reveal the bay.",
      "expected_evidence": "Panel-open reference state matches the named model.",
      "hold_or_limit": "Do not force another hinge direction or claim physical clearance from this viewer."
    },
    {
      "number": 8,
      "action": "Identify P1 and J1",
      "instruction": "Distinguish the moving bay plug from the unit-fixed receptacle.",
      "expected_evidence": "One plug and one receptacle are identified.",
      "hold_or_limit": "Ambiguous identity or source detail means HOLD."
    },
    {
      "number": 9,
      "action": "Review separation and harness parking",
      "instruction": "In a reviewed demonstration, separate the coupling and park the harness outside the rail path.",
      "expected_evidence": "Coupling and parked-harness evidence are available.",
      "hold_or_limit": "A cable across the path blocks rail travel."
    },
    {
      "number": 10,
      "action": "Review T1 and T2",
      "instruction": "Identify unit-mounted retainer cams and cabinet-fixed keepers.",
      "expected_evidence": "The model/source shows the intended clear retainer state.",
      "hold_or_limit": "Unclear pivot, keeper contact or state requires review."
    },
    {
      "number": 11,
      "action": "Inspect supported withdrawal",
      "instruction": "Use the withdrawn GLB to inspect rail alignment and continuous support.",
      "expected_evidence": "Both rails and the support bed remain part of the plan.",
      "hold_or_limit": "A static GLB is not proof that a physical movement was completed."
    },
    {
      "number": 12,
      "action": "Record the checkpoint",
      "instruction": "Record the named withdrawn state and any missing view before the configuration decision.",
      "expected_evidence": "A reviewer can trace source, state and unresolved gaps.",
      "hold_or_limit": "The existing tray-transfer checkpoint is not a demonstrated continuous lateral lift."
    }
  ]
}
