AER-TRN-01-P01 / Access and supported withdrawal Concept draft 1.0 Fictional inert trainer only; source/training reviewer approval required before training use. No operational aircraft, OEM, qualification, licence-credit or release authority. 1. Confirm the training article Read AER-TRN-01 and BAY-01; compare with the assigned lesson. Evidence: The article and source identify the same inert trainer. Hold/limit: A different or unreadable article ID means HOLD. 2. Freeze the lesson revision Use TRN-LRU-01 v2 teaching-cue concept; retain A permitted and B excluded. Evidence: The revision and allowed-unit list are recorded. Hold/limit: A missing source or changed list requires reviewer disposition. 3. Confirm an inert training setup The instructor establishes the permitted inert setup and supervised scope. This draft does not supply a real isolation procedure. Evidence: The reviewer has accepted the training conditions. Hold/limit: Do not apply this draft to energized equipment or an aircraft. 4. Review the support and access space Identify AP-01, its left hinge and R1/R2 with the support bed. Evidence: The intended model access and rail path are understood. Hold/limit: Missing support or an obstructed sweep means HOLD. 5. Identify and release D1 On the reviewed model, operate the upper catch D1. Evidence: D1 is visibly clear. Hold/limit: Do not infer a safe release from an occluded view. 6. Identify and release D2 Operate lower catch D2 before AP-01. Evidence: Both catches are visibly clear. Hold/limit: An engaged catch blocks the panel step. 7. Open AP-01 Use the source left-hinge direction to reveal the bay. Evidence: Panel-open reference state matches the named model. Hold/limit: Do not force another hinge direction or claim physical clearance from this viewer. 8. Identify P1 and J1 Distinguish the moving bay plug from the unit-fixed receptacle. Evidence: One plug and one receptacle are identified. Hold/limit: Ambiguous identity or source detail means HOLD. 9. Review separation and harness parking In a reviewed demonstration, separate the coupling and park the harness outside the rail path. Evidence: Coupling and parked-harness evidence are available. Hold/limit: A cable across the path blocks rail travel. 10. Review T1 and T2 Identify unit-mounted retainer cams and cabinet-fixed keepers. Evidence: The model/source shows the intended clear retainer state. Hold/limit: Unclear pivot, keeper contact or state requires review. 11. Inspect supported withdrawal Use the withdrawn GLB to inspect rail alignment and continuous support. Evidence: Both rails and the support bed remain part of the plan. Hold/limit: A static GLB is not proof that a physical movement was completed. 12. Record the checkpoint Record the named withdrawn state and any missing view before the configuration decision. Evidence: A reviewer can trace source, state and unresolved gaps. Hold/limit: The existing tray-transfer checkpoint is not a demonstrated continuous lateral lift.