AER-TRN-01-P02 / CONCEPT DRAFT 1.0
Configuration decision and permitted recovery
A near-identical unit is a useful test of source-based judgment, not a fit challenge.

Fictional inert trainer only; source/training reviewer approval required before training use. No operational aircraft, OEM, qualification, licence-credit or release authority.
Article AER-TRN-01 · lesson TRN-LRU-01 · concept draft 1.0 · source review required
- 01
Resume the reviewed checkpoint
Confirm the accepted access/support state from P01.
- Expected evidence
- The task starts at a recorded checkpoint.
- Hold / limitation
- An unknown state requires HOLD and reset/review.
- 02
Read both candidate identities
Compare TRN-210A and TRN-210B in the approved concept illustration.
- Expected evidence
- Two distinct identifiers are recorded.
- Hold / limitation
- The two source GLBs contain A only; B is not silently invented as another measured model.
- 03
Read the permitted list
Use the unchanged list in TRN-LRU-01: A permitted; B excluded.
- Expected evidence
- The choice refers to the lesson source.
- Hold / limitation
- Appearance alone does not establish applicability.
- 04
Choose and explain
State which candidate this lesson permits and why.
- Expected evidence
- A is selected with a source-based explanation.
- Hold / limitation
- Choosing B triggers the hold branch.
- 05
Hold an excluded choice
Stop the authored exercise if B was selected.
- Expected evidence
- The reason and last accepted checkpoint are retained.
- Hold / limitation
- Do not force a fit or quietly amend the list.
- 06
Capture the discrepancy
Record candidate identity, article, lesson revision and the mismatch.
- Expected evidence
- The instructor can review a bounded discrepancy.
- Hold / limitation
- Missing identity evidence prevents continuation.
- 07
Obtain disposition
The source/training reviewer confirms the next permitted step.
- Expected evidence
- The review is explicit; B stays excluded.
- Hold / limitation
- A website message is not an engineering disposition.
- 08
Recover to permitted A
Reset to the accepted checkpoint and select confirmed A.
- Expected evidence
- A choice and the recovery path are visible.
- Hold / limitation
- Do not erase the earlier wrong choice or hints.
- 09
Check the rail path
Confirm the planned harness clearance, support and R1/R2 alignment.
- Expected evidence
- The sequence can be explained before the model state changes.
- Hold / limitation
- Obstruction or inadequate support requires HOLD.
- 10
Inspect A alignment
Use the same model identity and the withdrawn view to inspect the intended rail relationship.
- Expected evidence
- A aligns with the source rail geometry.
- Hold / limitation
- Normalized geometry does not establish real interchangeability.
- 11
Inspect the seated reference
Compare with the original closed/seated reference and record remaining restoration work.
- Expected evidence
- The intended seated state is identified.
- Hold / limitation
- No latch, connector or aircraft acceptance follows from this state alone.
- 12
Retain decision evidence
Keep chosen ID, wrong-choice branch, disposition and recovery explanation for P03.
- Expected evidence
- The instructor can assess the decision and gaps.
- Hold / limitation
- Do not issue an automatic competence or task-release result.