{
  "main_use_case": "Inert avionics-style training unit exchange and configuration decision: identify the lesson-permitted unit, open the reviewed access path, demonstrate supported rail travel, recognize an excluded look-alike and recover through instructor disposition.",
  "equipment": {
    "id": "AER-TRN-01",
    "name": "Inert access-bay unit-exchange trainer",
    "bay_id": "BAY-01",
    "lesson_id": "TRN-LRU-01",
    "lesson_revision": "v2 teaching-cue concept; permitted-unit list unchanged from v1",
    "scope": "Fictional supplementary training concept. Not an aircraft system, OEM source, airworthiness instruction, qualified maintenance task or working Genesis lesson."
  },
  "named_components": [
    {
      "id": "BAY-01",
      "nodes": [
        "BAY_01"
      ],
      "role": "Fixed inert equipment bay and supports"
    },
    {
      "id": "AP-01",
      "nodes": [
        "PANEL",
        "access_panel",
        "hinge_0.55",
        "hinge_4.1"
      ],
      "role": "Left-hinged access panel",
      "motion": "PANEL rotation around local Y at world hinge [-3,0,1.1], closed 0 to -95 degrees"
    },
    {
      "id": "D1",
      "nodes": [
        "D1",
        "D1_catch",
        "D1_pivot"
      ],
      "role": "Upper panel catch",
      "motion": "Release to 90 degrees; validate local joint axis and clearance against existing scene before rigging"
    },
    {
      "id": "D2",
      "nodes": [
        "D2",
        "D2_catch",
        "D2_pivot"
      ],
      "role": "Lower panel catch",
      "motion": "Release to 90 degrees before opening AP-01"
    },
    {
      "id": "TRN-210A",
      "nodes": [
        "UNIT_A",
        "unit_body",
        "unit_front",
        "unit_handle"
      ],
      "role": "Permitted fictional unit for TRN-LRU-01; distinguish removed A and replacement A in the teaching scenario",
      "motion": "Translate along local/world Z 0 to +4.1 arbitrary scene units; remain supported"
    },
    {
      "id": "TRN-210B",
      "nodes": [],
      "role": "Excluded look-alike decision alternative",
      "missing": "No separately named B unit in these two GLBs. Existing illustration shows B; Jan must add a distinct labeled candidate without claiming interchangeable fit."
    },
    {
      "id": "T1",
      "nodes": [
        "T1_CAM",
        "T1_tongue",
        "T1_short_L_tip",
        "T1_fixed_keeper"
      ],
      "role": "Unit-mounted left retainer and cabinet-owned keeper",
      "motion": "Rotate local Z 0 to +90 degrees, pivot [-1.52,1.67,.12] relative to UNIT_A; travels with unit"
    },
    {
      "id": "T2",
      "nodes": [
        "T2_CAM",
        "T2_tongue",
        "T2_short_L_tip",
        "T2_fixed_keeper"
      ],
      "role": "Unit-mounted right retainer and cabinet-owned keeper",
      "motion": "Rotate local Z 0 to -90 degrees, pivot [1.52,1.67,.12] relative to UNIT_A; travels with unit"
    },
    {
      "id": "P1 / J1",
      "nodes": [
        "PLUG",
        "coupling_collar",
        "plug_body",
        "unit_receptacle_outer",
        "unit_receptacle_black"
      ],
      "role": "Moving bay plug and unit-fixed receptacle",
      "motion": "Show separation and parked cable clear of rails; never two plugs or detached receptacle"
    },
    {
      "id": "R1 / R2",
      "nodes": [
        "rail_-2.1",
        "rail_2.1",
        "support_rail_-2.1",
        "support_rail_2.1",
        "support_bed"
      ],
      "role": "Fixed guide rails and continuous roller support",
      "motion": "Support bed from z=.7 to5.5; unit bottom y=.275; arbitrary units, not engineering dimensions"
    }
  ],
  "geometry_and_fit_constraints": [
    "Preserve unit-mounted retainers T1/T2 parented to UNIT_A; keepers remain fixed to BAY-01. No shear, scale or flexible metal invented during rotation.",
    "D1 and D2 must release before the left-hinged AP-01 opens; camera stays outside the panel/equipment sweep.",
    "Keep a single plug attached to the bay harness and one fixed unit receptacle. Park harness clear before rail travel.",
    "Keep unit aligned on both rails; full unit mass stays on continuous support. Do not show floating unsupported equipment.",
    "The removed-original-to-tray transfer is a separate checkpoint state in existing scenes, not a continuously demonstrated lateral lift. Do not claim that missing transfer action has been validated.",
    "Do not infer metres, masses, torques, tolerances, connector pinout, electrical isolation procedure, tool specification or approved fit from normalized geometry.",
    "Closed/withdrawn state metadata alone is not animation, physics validation or proof of collision-free operation. Validate repaired joints, translations and cable path."
  ],
  "permitted_procedure_inputs": {
    "approved_operating_sop_supplied": false,
    "existing_inputs": [
      "TRN-LRU-01 fictional authored lesson labels and reviewed component/motion sequence in current assets",
      "Source rig and per-frame target traces for authored D1/D2/panel and rail movement",
      "Existing public Airbus/FAA/EASA context links retained as general sources, not an equipment operating SOP"
    ],
    "planned_public_drafts": [
      "AER-TRN-01-P01: source identity, access and supported exchange demonstration",
      "AER-TRN-01-P02: excluded-unit hold, instructor disposition and permitted recovery",
      "AER-TRN-01-P03: final-state evidence and reviewed lesson improvement"
    ],
    "draft_scope": "Concept training procedure drafts only. Human review required before training use. No aircraft maintenance release, OEM applicability, certification or licence-credit claim."
  },
  "mirror_direct_prompt": "Reuse and repair the supplied AER-TRN-01 R2 CLOSED and WITHDRAWN GLBs rather than inventing a new bay. Build one coherent inert avionics-style unit-exchange trainer from the approved fictional reference images. Preserve the named hierarchy BAY_01, PANEL/AP-01, D1, D2, UNIT_A/TRN-210A, T1_CAM, T2_CAM, PLUG/P1 and unit receptacle/J1, plus fixed R1/R2 rails and roller support. Improve surface finish and part readability while keeping the existing scale relationships. Retain true pivots and rigid parts. Add clearly separate removed A, permitted replacement A and excluded look-alike TRN-210B with readable labels; the B candidate is a teaching decision, not proof of alternative fit. Provide a named, versioned GLB, component manifest and measured joint/state table. Include inspection views of closed, catches clear, panel open, plug separated/parked, retainers clear, supported withdrawn unit, permitted A aligned/seated and restored state. Do not hallucinate electrical details, engineering dimensions, approved isolation, torque, OEM identity, certification or airworthiness. Report missing inputs and any geometric conflict. This is a fictional concept asset for a reviewed Genesis training scenario, not an operational aircraft model.",
  "mirror_direct_source_requirements": [
    "The two exact GLBs and their hashes listed above; retain an untouched source copy.",
    "Original approved open/closed reference images and existing identity/rail illustrations.",
    "R2_CONTINUATION_SCENE.json plus component manifest, source unit conventions, hinge/pivot coordinates and state constraints.",
    "For any real-equipment adaptation: owner permission, consistent multi-angle photographs, dimensions, article/configuration identifiers and responsible engineering/source reviewer before fidelity or fit claims.",
    "Deliver model version, named groups/meshes, material attribution, GLB and source project, component/state JSON, known limitations and preview images. No regenerated photographs should be passed off as source evidence."
  ],
  "genesis_scenario": {
    "id": "AER-GEN-EXCHANGE-01",
    "status": "BRIEF_ONLY_NOT_A_WORKING_SIMULATION",
    "Briefing": {
      "goal": "Use the article and lesson IDs, permitted A/excluded B list and supervised inert-trainer scope to plan the task. Identify AP-01, D1/D2, P1/J1, T1/T2 and R1/R2.",
      "prerequisites": [
        "Qualified human source/training reviewer",
        "Reviewed draft sequence and model joints",
        "Defined safety/reset/hold criteria for the inert trainer"
      ],
      "success_evidence": "Learner explains article identity, source revision, permitted choice and when to hold."
    },
    "ShowMe": {
      "demonstration": [
        "Release D1 then D2; open AP-01 on the left hinge",
        "Separate P1 from J1 and park harness clear",
        "Release T1/T2; withdraw the unit along supported R1/R2",
        "Checkpoint: removed A supported on tray; choose identified permitted replacement A",
        "Align/seat A, restore retainers/coupling/panel/catches using reviewed state evidence"
      ],
      "visual_rules": "Synchronize selected component, instruction and expected state. No labels on an occluded part, no floating icon hands, and no claim that a static state is a demonstrated physical action."
    },
    "TrainMe": {
      "learner_actions": [
        "Choose the article/source revision and permitted unit",
        "Order component actions, operate reviewed joints and align supported rail travel",
        "Capture or identify evidence for each finished state"
      ],
      "meaningful_wrong_choice": "Learner chooses near-identical TRN-210B or tries to continue while a catch is engaged / harness crosses the rail path.",
      "hold": "Prevent the simulated next step, state the specific identity/prerequisite mismatch and request instructor disposition. Do not force fit or silently rewrite the permitted-unit list.",
      "recovery": "Record the mismatch, retain B as excluded, select confirmed TRN-210A and resume from the last reviewed safe checkpoint.",
      "feedback": "Event-linked feedback for identity, prerequisite order, rail alignment and visible seated/restored state; preserve attempt and hint history. A written website exercise is not this simulation."
    },
    "AssessMe": {
      "evidence": [
        "Article/lesson revision and component selections",
        "Decision rationale and hold/recovery record",
        "Ordered completed-state evidence and any missing view",
        "Instructor review/disposition"
      ],
      "acceptance": "Score only instrumented and observable events; expose missing evidence. Jan and the source/training owner define rubric and human approval. No automatic competence, aircraft release or regulatory qualification claim."
    }
  },
  "missing_inputs": [
    "Separate named TRN-210B/removed-original/replacement identity objects in the reusable GLBs.",
    "Reviewed actual joint axis/stop/collision and cable-parking data; real dimensions/tolerances absent.",
    "Approved operating SOP and operational equipment/source owner absent; only concept drafts are defensible now.",
    "A reviewed Genesis task/application URL, actual published simulation and runtime event/rubric output do not exist for this Aerospace concept yet.",
    "Native product workspace/access and permitted source upload route must be chosen by Jan/root. No credentials or provider job requested by this brief."
  ],
  "scope": "Concept authoring pack; not a live simulation or approved operating lesson."
}
